MirrorNest
← Todas las guías

Home Assistant OS

The dedicated, appliance-style operating system for Home Assistant -- a free, open-source home automation hub -- flashed straight to an SD card, USB drive, or run as a VM.

Sistema: Raspberry Pi (SD card), dedicated hardware (USB), or VMHome AutomationIoTSitio oficial ↗Documentación oficial ↗
Esta guía se elaboró a partir de la documentación oficial de Home Assistant OS, enlazada arriba — verifica siempre ahí los nombres exactos de paquetes/versiones antes de ejecutar estos comandos en un servidor de producción, ya que las versiones de la distribución y del proyecto cambian con el tiempo.

  1. 1Install the Home Assistant OS installer app

    The official installer handles downloading the right image and flashing it -- available for Windows, MacOS, and Linux.

    Home Assistant OS installer downloads ↗

  2. 2Flash the image to your target drive

    Insert the SD card or USB drive, pick your device model (Raspberry Pi, Generic x86-64, ...) in the installer, and let it write the image.

    This erases the target drive completely.

  3. 3Boot the device and wait for first-run setup

    First boot takes several minutes while it expands the filesystem and downloads updates -- the device is reachable once the onboarding page loads.

    http://homeassistant.local:8123