MirrorNest
← Todas las guías

Unraid

A commercial (paid license, free 30-day trial) NAS/hypervisor OS that boots from a USB flash drive, with flexible mixed-size-disk storage, Docker, and VM support.

Sistema: Dedicated hardware (USB boot)NASVirtualizationSitio oficial ↗Documentación oficial ↗
Esta guía se elaboró a partir de la documentación oficial de Unraid, enlazada arriba — verifica siempre ahí los nombres exactos de paquetes/versiones antes de ejecutar estos comandos en un servidor de producción, ya que las versiones de la distribución y del proyecto cambian con el tiempo.

  1. 1Note the licensing before starting

    Unraid requires a paid license key after a 30-day free trial -- unlike the other NAS platforms in this section, it is not open-source or perpetually free.

  2. 2Create the boot USB with the official USB Creator

    The USB Creator tool downloads the OS and writes it to a flash drive in one step -- Unraid boots and runs entirely from this drive.

    Unraid USB Creator ↗

  3. 3Boot the target machine from the USB drive

    Unraid boots directly to a console showing its web UI's address -- no separate install step, since the OS runs from the USB drive itself.

    http://tower.local

  4. 4Assign disks and start the array

    In the web UI's Main tab, assign a parity disk and your data disks, then start the array before creating shares.