MirrorNest
← Tutte le guide

Home Assistant OS

The dedicated, appliance-style operating system for Home Assistant -- a free, open-source home automation hub -- flashed straight to an SD card, USB drive, or run as a VM.

Sistema: Raspberry Pi (SD card), dedicated hardware (USB), or VMHome AutomationIoTSito ufficiale ↗Documentazione ufficiale ↗
Questa guida è redatta a partire dalla documentazione ufficiale di Home Assistant OS, linkata sopra — verifica sempre lì i nomi esatti di pacchetti/versioni prima di eseguire questi comandi su un server di produzione, poiché le versioni della distribuzione e del progetto cambiano nel tempo.

  1. 1Install the Home Assistant OS installer app

    The official installer handles downloading the right image and flashing it -- available for Windows, MacOS, and Linux.

    Home Assistant OS installer downloads ↗

  2. 2Flash the image to your target drive

    Insert the SD card or USB drive, pick your device model (Raspberry Pi, Generic x86-64, ...) in the installer, and let it write the image.

    This erases the target drive completely.

  3. 3Boot the device and wait for first-run setup

    First boot takes several minutes while it expands the filesystem and downloads updates -- the device is reachable once the onboarding page loads.

    http://homeassistant.local:8123