← Todos os guias
Home Assistant OS
The dedicated, appliance-style operating system for Home Assistant -- a free, open-source home automation hub -- flashed straight to an SD card, USB drive, or run as a VM.
Destino: Raspberry Pi (SD card), dedicated hardware (USB), or VMHome AutomationIoTSite oficial ↗Documentação oficial ↗
Este guia foi elaborado a partir da documentação oficial do Home Assistant OS, ligada acima — verifique sempre lá os nomes exatos dos pacotes/versões antes de executar estes comandos num servidor de produção, uma vez que as versões da distribuição e do projeto mudam com o tempo.
1Install the Home Assistant OS installer app
The official installer handles downloading the right image and flashing it -- available for Windows, MacOS, and Linux.
2Flash the image to your target drive
Insert the SD card or USB drive, pick your device model (Raspberry Pi, Generic x86-64, ...) in the installer, and let it write the image.
This erases the target drive completely.
3Boot the device and wait for first-run setup
First boot takes several minutes while it expands the filesystem and downloads updates -- the device is reachable once the onboarding page loads.
http://homeassistant.local:8123